
Top pick, concrete and concrete pavers
Armor AR350 Low Gloss Wet Look Concrete Sealer
Armor (Foundation Armor)
A solvent-based, low-gloss acrylic sealer for concrete and concrete pavers that darkens the surface to a wet look.
Armor's technical data sheet lists a solvent-based, low-gloss pure acrylic sealer with 25% solids, 4 to 6 hours to dry and 24 hours to recoat and for foot traffic, with coverage of about 175 sq ft per gallon on porous surfaces or 200 to 225 sq ft per gallon on smooth ones. Two coats are suggested. Apply to a clean, dry surface at least 24 hours after pressure washing. Armor says not to use it on clay brick, flagstone or natural stone.
- Base
- Solvent-based acrylic
- Finish
- Low gloss, wet look
- Coverage
- 175 sq ft/gal porous; 200 to 225 smooth
- Surfaces
- Concrete and concrete pavers
Best for: Unsealed concrete or concrete pavers, or surfaces already sealed with a solvent-based acrylic, where you want a color-enhancing wet look.
What the sources support
- Armor lists low-gloss, wet-look color enhancement.
- Roughly 24 hours to recoat and foot traffic, per Armor.
- 5-gallon and 1-gallon sizes are on Amazon.
Trade-offs
- Solvent-based. Follow Armor's ventilation and temperature guidance.
- It darkens the surface and cannot be undone easily.
- Not for clay brick, flagstone or natural stone per Armor.
Listing note: This button opens the 5-gallon listing. A 1-gallon listing is ASIN B00KBE55JQ on Amazon.
Demand check: No Amazon sales-rank snapshot taken for this listing.
Sources: Armor AR350 technical data sheet
Price changes daily. Open the retailer to see today's price.
As an Amazon Associate I earn from qualifying purchases. Disclosure.
